Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Scientific Reports volume 13, Article number: 13290 (2023 ) Cite this article Magnesium Oxide For Vulcanizing Agent
By roughly mimicking the surface architectural design of dragonfly wings, novel bi-phasic 3D nanoflowers of MgO/Mg(OH)2 were successfully synthesized via the electrospinning technique. The 3D nanoflowers were coated over a commercial melamine sponge and extensively characterized by SEM, XRD, FTIR, and EDS. The formation of distinct dense 3D nano petals was revealed by SEM images whereby the mean petal thickness and mean distance between the adjacent petals were found to be 36 nm and 121 nm, respectively. The bactericidal activities of synthesized 3D nano-flowers coated melamine sponges were assessed against five different bacteria (Staphylococcus aureus, Enterococcus faecalis, Escherichia coli, Klebsiella pneumoniae, and Pseudomonas aeruginosa). This study demonstrated significant bactericidal activity of MgO/Mg(OH)2 3D nanoflowers coated MS against Gram-positive and Gram-negative bacteria. Plausible bactericidal mechanisms include envelope deformation, penetration, and induction of oxidative stress. This study introduces novel bioinspired biomaterial with the capacity to reduce the risk associated with pathogenic bacterial infections, especially in medical devices.
Reza Eivazzadeh-Keihan, Fateme Radinekiyan, … Hamid Madanchi
Reza Eivazzadeh-Keihan, Farkhondeh Alimirzaloo, ... Mohammad Mahdavi
Ryunosuke Shimura, Hiroya Abe, … Chihiro Inoue
Antibacterial surfaces are in high demand for biomedical applications to reduce infections associated with implanted medical devices that costs nearly 5–10 billion dollars a year1. Several nanoparticles such as that of titanium oxide, zinc oxide, and silver oxide have shown reasonable bactericidal activity toward a wide spectrum of bacterial strains2,3. However, the cytotoxic effects associated with the accumulation of heavy metal elements-based nanoparticles in the human body have raised serious concerns against their use as bactericidal agents4,5. Although coating of biomedical devices with biocidal agents such as silver and antibiotics is a conventional biochemical approach; concomitantly, excessive use of antibiotics renders bacteria drug-resistant and causes chronic infections6. It has been estimated that nearly 10% of the patients that undergo medical implant surgery develop acute bacterial infections causing an average of 0.1 million deaths in the United States7. Once the infection occurs at the biomedical implant-tissue interface, the removal of the medical device and/or implant via secondary surgery becomes inevitable. This not only causes discomfort for the patient but also increases the healthcare cost8. With the excessive use of antibiotics, the ever-increasing emergence of antibiotic-resistant bacterial strains has rendered the need to discover novel antibacterial strategies and bactericidal agents9.
In the past decade, nano-scale modification of surfaces has offered new routes for the creation of engineered anti-bacterial topographies10. For instance, grooves, ridges and ripples-based structures have shown enormous potential in mitigating biofilm formation by reducing bacterial adhesion 10,11. Recently, the discovery of biocidal activity of naturally occurring high aspect ratio nano-architectures that appears on the surface of insect wings such as cicadae and dragonflies has triggered the research for novel antibacterial nanomaterial topographies12. The physical interactions between the attached pathogens and nanoscale topographies drive the antimicrobial activity of such surfaces13. Besides insect wings, other naturally occurring anti-biofouling and self-cleaning surfaces include rice leaves14, lotus leaves15, gecko skin16 and shark skin17,18. Inspired by the bactericidal nano-architecture of natural materials, nano protrusions have been successfully developed with titanium19,20, gold21, diamond22, black silicon23 and poly(methyl methacrylate)24. Almost all of these artificial nano-architectures display excellent biocidal activity towards both Gram-positive and Gram-negative bacteria.
Magnesium-based alloys remain the most desirable bio-implant material owing to their biocompatible and non-toxic nature. Besides being non-toxic in nature, these materials are enriched with marvelous mechanical properties comparable to that of human bone25. The biocompatible and non-toxic nature of magnesium-based materials as well as their widespread application in the biomedical field has encouraged us to elect magnesium for the conception of novel bactericidal topographies. In this research, 3D nanoflowers of bi-phasic MgO/Mg(OH)2 were successfully synthesized by roughly mimicking the surface architectural design of dragonfly wings. The 3D nanoflowers were synthesized by electrospinning technique followed by calcination and steaming. Analytical techniques such as XRD, SEM, FTIR, and EDS were employed to comprehensively characterize the 3D nanoflowers. With the assumption that the surface topography of 3D nanoflowers would exhibit similar bactericidal activity as that of dragonfly wings, the freshly prepared nanoflowers were incorporated into commercial melamine sponge (MS). MS was adopted as the support material due to its intrinsic properties such as low cost, non-toxic nature, high porosity, highly permeable channels, and 3D architecture that provides large surface area suitable for the deposition of nano materials. The bactericidal efficacies of bi-phasic MgO/Mg(OH)2 3D nanoflowers coated MS were investigated against five different bacteria including both Gram-positive and Gram-negative bacteria (Staphylococcus aureus, Enterococcus faecalis, Escherichia coli, Klebsiella pneumoniae, and Pseudomonas aeruginosa).
Magnesium hydroxide (reagent grade, 95%) and polyvinyl alcohol (PVA) (87–90% hydrolyzed, molecular weight 30,000–70,000), were purchased from Sigma-Aldrich while glacial acetic acid (analytical grade, 99.8%), polyacrylic acid (PAA) (25 wt% in water), and chitosan were acquired from Scharlau, Alfa Aesar, and MP Biomedicals, respectively. Melamine sponge (MS) (brand: Vesta) was sourced from a local e-commerce company. All the chemicals were used as received without further purification.
0.25 g Mg(OH)2 was dissolved in 5 ml glacial acetic acid at 55 °C for 1 h in an ultrasonication bath (brand: Elmasonic P, 37 kHz). An aqueous PVA solution (5% w/w) was prepared by dissolving PVA powder in deionized (DI) water at room temperature under continuous magnetic stirring for 12 h at 600 rpm. Both the above solutions were mixed in a ratio of 15:100 (v:v) and ultrasonicated (37 kHz) at 55 °C for 20 min to obtain a clear solution. This solution was then placed in a 5 ml Terumo® syringe equipped with a 21Gx1/2″ gauge-size needle. Electrospinning was carried out with a needle-collector top-down configuration whereby the distance between the needle and the collector was maintained at 13 cm. The solution flow rate and applied DC voltage were set at 0.3 ml h−1 and 17 kV, respectively. The nanofiber layers were deposited on Al foil spread across the collector. In the end, the sample collected over Al foil was dried in a hot air oven at 110 °C for 24 h to obtain a brittle layer. The flakes collected after scratching this brittle layer were calcined in a muffle furnace (Nabertherm, Germany) at 350 °C for 1 h. The heating rate of the furnace was set at 2 °C min-1. After calcination, the samples were allowed to cool down naturally to room temperature and then ground to a fine powder using a mortar and pestle. Finally, the fine powder was subjected to steam for 40 min in a steam oven (Toshiba). After steaming, the powder was collected and dried at room temperature in a vacuum desiccator for 24 h.
The commercial MS was cut into a cuboid (1 cm × 1 cm × 0.5 cm) with the help of an art knife and soaked in freshly prepared 0.1 wt% PAA aqueous solution (pH = 1, adjusted with 1 M HCl) for 5 min. The MS was thoroughly squeezed with a pair of tweezers and then soaked in 0.5 wt% chitosan aqueous solution (pH = 5, adjusted with 1 M HCl) for another 5 min followed by sequential squeezing multiple times during the entire process. Through this process, PAA and chitosan bind together by electrostatic interaction26 and provide active sites for the deposition of nanoflowers. The MS was washed with DI water and finally immersed in 0.3 wt% aqueous suspensions of MgO/Mg(OH)2 3D nanoflowers for 20 min. During this process, MS was squeezed with a pair of tweezers and re-soaked in the aqueous suspension after 10 min. The 3D nanoflowers coated MS thus obtained was dried in a hot air oven at 60 °C for 6 h.
X-ray diffraction (XRD) diffractograms of biphasic MgO/Mg(OH)2 were recorded with Bruker D8 Advance X-ray diffractometer equipped with LYNXEYE detector. The X-ray generator was operating at 40 kV and 25 mA. The diffractograms were recorded at angles (2θ) between 10° and 70° with a step size of 0.03° (2θ) employing Cu Kα radiation (λ = 1.5406 Å). The crystallite size (d) of MgO/Mg(OH)2 nanoparticles was evaluated by Debye–Scherrer’s formula (Eq. 1).
where 0.9 represents the molecular shape factor, λ is the wavelength of Cu Kα radiation (1.5406 Å), β is the full width at half maxima (radians) and θ is the Bragg’s diffraction angle (radians) corresponding to the most intense peak.
Surface morphologies of the samples were examined by scanning electron microscope (SEM) (JEOL JSM-7600 F). The sample imaging was improved by sputter coating with Au. Sputter coating enriches the secondary electron signal required for topographic examination by inhibiting sample charging during SEM analysis. ImageJ software (version 1.53t) from the National Institute of Health, USA was used to analyze the SEM images. The elemental imaging of coated melamine sponge was carried out by energy-dispersive spectroscopy (EDS) (X-MaxN-50, Oxford Instruments) embedded within the SEM. Fourier transform infrared spectroscopy (FTIR) was conducted to determine the chemical structure of the samples. For this purpose, Agilent Cary 630 FTIR spectrometer was employed to collect FTIR spectra at a resolution of 1 cm−1 between the wavelengths 650–4000 cm−1 with 32 scans each.
Five different bacteria strains (S. aureus, E. faecalis, E. coli, K. pneumoniae, and P. aeruginosa) were used to ascertain the bactericidal effects of 3D nanoflowers coated MS. Each bacteria was sub-cultured onto trypticase soy agar (TSA) with 5% sheep blood plate and incubated for 18–24 h before commencing the antibacterial study. A 0.5 McFarland bacterial suspension was prepared for each organism using a sterile saline solution. Each MS weighing between 0.021 and 0.032 g was fully immersed in defined volumes between 1.68 and 2.56 ml (0.0125 g of MS per ml) of bacterial suspension with a concentration of 104–105 cfu ml−1 and incubated for a total of 24 h. From each bacterial suspension a sampling volume of 10 ul was collected at baseline (t = 0) and defined intervals (t = 2, 4, 8, and 24 h) of incubation and plated onto culture plates in duplicates, which were then incubated for 18–24 h before enumeration. All incubation was performed at 35 °C, under aerobic conditions. The presence of any bacterial growth on the culture plates was enumerated and the average colony-forming unit (cfu) of the two plates was calculated for each bacteria. A control suspension (bacteria only without the MS) was set up alongside each corresponding test suspension and sampled as per the time intervals above. Another control solution (sterile saline with MS) was also set up and sampled at t = 0 and t = 24 h to control for sterility throughout the study.
Figure 1a shows the powder XRD spectrum of biphasic MgO/Mg(OH)2 prepared via an electrospinning technique followed by calcination and steaming processes. The peaks at 2θ values 18.5°, 33.0°, 37.9°, 50.7°, 58.6° and 68.1° correspond to (001), (100), (101), (102), (110) and (103) lattice planes of Mg(OH)2 (ICDD 00-044-1482) while the two peaks at 2θ values 42.9° and 62.3° refers to (200) and (220) lattice planes of MgO (ICDD 00-045-0946), respectively. The existence of diffraction peaks corresponding to both MgO and Mg(OH)2 explicitly confirms the formation of biphasic MgO/Mg(OH)2. The crystallite size as calculated from the most intense peak (37.9°) was found to be 8.8 nm. In addition, the high crystallinity of the synthesized nanomaterial was apparent from the presence of intense XRD peaks.
(a) Powder XRD spectrum of biphasic MgO/Mg(OH)2; (b) FTIR spectra of uncoated melamine sponge, MgO/Mg(OH)2 and MgO/Mg(OH)2 coated melamine sponge.
The FTIR spectra of MgO/Mg(OH)2 3D nanoflowers, uncoated MS, and MgO/Mg(OH)2 3D nanoflowers coated MS are shown in Fig. 1b. The spectrum of biphasic MgO/Mg(OH)2 displays sharp intense peak at 3697 cm−1 and a distinct band at 1411 cm−1. These were ascribed to the stretching (3697 cm−1) and bending (1411 cm−1) vibrations of the surface hydroxyl group27. In the FTIR spectra of MgO/Mg(OH)2 coated and uncoated MS, the peaks at 3312, 1559, 1460, 1313, 1145, 1013, 806 cm-1 refer to the N–H stretching, C=N stretching, –CH2– bending, C–O stretching, C–H bending and triazine ring bending vibrations, respectively. The presence of a sharp O–H stretching peak at 3697 cm-1 in the FTIR spectrum of MgO/Mg(OH)2 3D nanoflowers coated MS confirms the successful attachment of MgO/Mg(OH)2 to the MS.
The morphologies of MgO/Mg(OH)2 3D nanoflowers, uncoated MS, and MgO/Mg(OH)2 3D nanoflowers coated MS are shown in SEM images (Fig. 2). The uncoated MS exhibit highly inerratic 3D reticular structure with pore size ranging between 100 and 200 µm (Fig. 2B” and C”). The deposition of MgO/Mg(OH)2 (marked by arrows) onto the MS skeleton is visible in SEM images (Fig. 2A,B,C,D). After coating with 3D nanoflowers of MgO/Mg(OH)2, the smooth MS surface became rough while the intrinsic 3D reticular structure of MS remained almost intact. Subsequently, the color of MS changed from pure white to light brown. The magnified SEM image (Fig. 2E) of MgO/Mg(OH)2 3D nanoflowers coated MS revealed the formation of distinct dense nano petals. Upon analysis with image analysis software (ImageJ), the mean petal thickness and mean distance between adjacent petals of 3D nanoflowers were found to be 36 nm and 121 nm, respectively. Both these parameters were determined using a sample size of 50. From the histogram plots (Fig. 3), it is obvious that the adjacent distance between the majority of 3D nanoflower petals ranges between 90 and 130 nm while the petal’s thickness varies from 25 to 45 nm. Figure 4 shows EDS mapping of the cross-sectional view of MgO/Mg(OH)2 coated MS. The major elements vis. Mg, C, and O were uniformly distributed over the entire subject area. This evidence confirms that the 3D nanoflowers of MgO/Mg(OH)2 were incorporated deep inside the inerratic 3D reticular structure of the MS. Indeed, the uniform light brown color of MgO/Mg(OH)2 coated MS ascertains homogeneous distribution of MgO/Mg(OH)2 nanoflowers throughout the 3D network of MS.
SEM images of uncoated melamine sponge (B”, C”), MgO/Mg(OH)2 coated melamine sponge (A, B, C, D) at different magnifications and MgO/Mg(OH)2 3D nanoflowers showing distinct petals (E).
Histogram plots of distance between adjacent petals and petals thickness.
SEM image (A) and EDS mapping of the cross-sectional view of MgO/Mg(OH)2 coated melamine sponge showing distribution of magnesium (B), carbon (C) and oxygen (D).
The bactericidal efficacy of MgO/Mg(OH)2 3D nanoflowers coated MS was determined over a period of 24 h against five different bacteria including two Gram-positive (S. aureus and E. faecalis) and three Gram-negative (E. coli, K. pneumoniae, and P. aeruginosa) bacteria. Figure 5 shows temporal variation in cfu and Log(count) of S. aureus, E. faecalis, E. coli, K. pneumoniae, and P. aeruginosa upon exposure to MgO/Mg(OH)2 3D nanoflowers coated MS. In this research, the selected Gram-positive and Gram-negative bacteria were spherical-shaped and rod-shaped, respectively. The initial 2 h bactericidal rate of 3D nanoflowers coated MS follows the sequence: P. aeruginosa > K. pneumoniae > S. aureus > E. faecalis (Fig. 5). From this trend, it is evident that in general the initial rate of bactericidal activity was higher for rod-shaped than spherical-shaped bacteria. This was attributed to the large surface area of rod-shaped (Gram-negative) bacteria in direct contact with nano petals than spherical-shaped (Gram-positive) bacteria. In addition, thick and rigid cell walls of Gram-positive (spherical-shaped) bacteria allow them to withstand large mechanical deformation compared to Gram-negative bacteria (rod-shaped) which usually comprise thin and fragile cell walls28. On this fact, the nanopillar structure of Psaltoda claripennis cicada wings also shows bactericidal activity only against Gram-negative bacterial strains29.
Temporal variation in cfu count and Log(count) of Staphylococcus aureus (A/A’), Enterococcus faecalis (B/B’), Escherichia coli (C/C’), Klebsiella pneumoniae (D/D’) and Pseudomonas aeruginosa (E/E’) with and without MgO/Mg(OH)2 3D nanoflowers coated melamine sponge. Error bars are 1 SD from the mean of triplicate measurements.
Figure S1 shows the release profile of Mg from MgO/Mg(OH)2 coated melamine sponge at 35 °C. Since only an infinitesimal fraction of Mg was released over a duration of 24 h, it is apparent that the bactericidal activity was unassociated with the release of Mg from the MgO/Mg(OH)2 coated sponge. A plausible schematic illustration of the bactericidal mechanisms of 3D nano petals of MgO/Mg(OH)2 coated melamine sponge is shown in Fig. 6. Since the mean distance (121 nm) between the adjacent petals of MgO/Mg(OH)2 3D nanoflowers is much smaller than the minimum dimension (250 nm) of the bacteria; it is quite obvious that bacteria could easily rest over the nano petals array without tumbling into the gorge between them. Considering that the petals are substantially thinner (36 nm); it is expected that as the bacteria are pulled down towards the surface by adhesive and/or gravitational forces, the bacterial envelope is more likely to be deformed and penetrated by the nailing action of rigid nano petals (Mechanism I & II)30. Nano protrusions-induced bacterial envelope penetration and deformation have been well ascertained by bacterial cross-sectional analysis employing transmission electron microscopy (TEM), focused ion beam (FIB) microscopy, and tomography31. Strong experimental evidence suggests that Gram-negative bacteria are more prone to bacterial envelope deformation and penetration than Gram-positive bacteria31. Gram-positive bacteria’s reduced vulnerability towards nano protrusions deformation is mainly due to thick peptidoglycan layers that provide high rigidity and turgor pressure29. Notably, there is no experimental evidence in the literature that could advocate nano protrusions-induced mechanical rupture or lysis of bacterial cells. According to contact mechanic analysis (Hertzian model), the intrinsic pressure on a single nano protrusion in contact with a bacterium increases with a decrease in tip diameter. For instance, as the nano protrusion tip diameter decreases from 80 nm (blunt) to 40 nm (sharp), the corresponding intrinsic pressure increases from 3.7 to ~ 7.1 MPa32. Real-time imaging of mechanically-induced bacterial death by simultaneous nanoindentation and fluorescence microscopy validates that a pressure greater than 10.7 MPa is essential to puncture the cell wall of E.coli33. Since in our case, the mean petal’s thickness was 36 nm, the intrinsic pressure generated by nano petals in contact with the bacterium was much less than the minimum pressure required to puncture the bacterial cell wall. Although the pressure generated by a single nanoprotrusion tip of diameter 40 nm is insufficient to mechanically rupture the bacterial envelope; the increase in nanoprotrusions density however increases the bacterial cell membrane permeability due to high stretching of the suspended envelope. This fact has been experimentally verified elsewhere by comparison of LIVE/DEAD and BacTiter Glo assay data of Gram-positive and Gram-negative bacteria subject to surfaces with wide and dense nanopillars32. Hence, an optimal spacing between adjacent nano petals is highly desirable to achieve adequate bactericidal activity. For instance, a low pitch of interspacing (~ 100 nm) drastically improves the bactericidal efficiency of silicon nanostructures34. Computational analysis based on the finite element method suggests that smaller pillar radii and spacing amplifies envelope deformation about nano protrusion tips and deliver significant in-plane strains.35 Simulation studies also reinforce the fact that reduced interspacing boosts bactericidal activity of nano protrusion surfaces35. In our research, the mean distance of 121 nm between the adjacent petals of MgO/Mg(OH)2 3D nanoflowers was found to be adequate enough to display substantial bactericidal activity.
Schematic illustration of bactericidal mechanism of MgO/Mg(OH)2 3D nanoflowers coated melamine sponge.
Certainly, dense and sharp nano protrusions promote bacterial cell envelope deformation, penetration, and membrane permeability. Bacterial cells subjected to lethal stressors are induced by oxidative stress that triggers the formation of reactive oxygen species (ROS)36. Although several protective enzymes such as catalases, dismutase, etc. could detoxify low levels of ROS, if the ROS level crosses a certain threshold limit, bacterial death becomes inevitable and irreversible even after the initial stressor has been detached.37 ROS-mediated bacterial cell death has been well documented for Carbon nanotubes (CNTs)38. It is known that CNTs impose oxidative stress in both Gram-positive and Gram-negative bacteria by mechanically wrapping around them. This promotes production of ROS leading to bactericidal activity. Compelling experimental evidence favoring induced oxidative stress within bacterial cells upon contact with TiO2 nanopillars also corroborate the role of ROS in mediating reduced cell viability31.
The 3D nanoflowers of biphasic MgO/Mg(OH)2 synthesized via electrospinning were successfully incorporated into commercial MS. After coating, the intrinsic 3D reticular structure of MS remained almost intact. The adjacent distance between the majorities of 3D nanoflower petals ranged between 90 and 130 nm while the petal’s thickness varied from 25 to 45 nm. EDS mapping of the cross-sectional view of MgO/Mg(OH)2 coated MS confirmed the incorporation of 3D nanoflowers of MgO/Mg(OH)2 deep inside the inerratic 3D reticular structure of MS. This study demonstrated significant bactericidal activity of MgO/Mg(OH)2 3D nanoflowers coated MS against both Gram-positive and Gram-negative bacteria. It is expected that the novel bioinspired biphasic MgO/Mg(OH)2 3D nanoflowers coated MS could be applied to reduce the risk associated with pathogenic bacterial infections in the medical field.
The datasets used and/or analyzed during the current study are available from the corresponding author upon reasonable request.
Nguyen, N.-Y.T., Grelling, N., Wetteland, C. L., Rosario, R. & Liu, H. Antimicrobial activities and mechanisms of magnesium oxide nanoparticles (nMgO) against pathogenic bacteria, yeasts, and biofilms. Sci. Rep. 8, 16260 (2018).
Article ADS PubMed PubMed Central Google Scholar
Yin, I. X., Zhang, J. & Zhao, I. S. The antibacterial mechanism of silver nanoparticles and its application in dentistry. Int. J. Nanomed. 15, 2555 (2020).
Azizi-Lalabadi, M., Ehsani, A., Divband, B. & Alizadeh-Sani, M. Antimicrobial activity of Titanium dioxide and Zinc oxide nanoparticles supported in 4A zeolite and evaluation the morphological characteristic. Sci. Rep. 9, 17439 (2019).
Article ADS PubMed PubMed Central Google Scholar
Bahadar, H., Maqbool, F., Niaz, K. & Abdollahi, M. Toxicity of nanoparticles and an overview of current experimental models. Iran Biomed. J. 20, 1 (2016).
PubMed PubMed Central Google Scholar
Ravinayagam, V. & Jermy, B. R. in Applications of Nanomaterials in Human Health (ed. Firdos Alam Khan) 249–273 (Springer, 2020). https://doi.org/10.1007/978-981-15-4802-4_13.
Aslam, S. Effect of antibacterials on biofilms. Am. J. Infect Control 36, S175.e179 (2008).
Donelli, G. in Biofilm-based healthcare-associated infections, Vol I Vol. 830 (ed G. Donelli) V–VI (2015). https://doi.org/10.1007/978-3-319-11038-7.
Anjum, S. et al. Biomodification strategies for the development of antimicrobial urinary catheters: Overview and advances. Glob. Chall. 2, 1700068 (2018).
Sultana, A. & Zare, M. Surface engineering strategies to enhance the in situ performance of medical devices including atomic scale engineering. Int. J. Mol. Sci. 22, 22 (2021).
Hasan, J. & Chatterjee, K. Recent advances in engineering topography mediated antibacterial surfaces. Nanoscale 7, 15568 (2015).
Article ADS CAS PubMed PubMed Central Google Scholar
Nir, S. & Reches, M. Bio-inspired antifouling approaches: The quest towards non-toxic and non-biocidal materials. Curr. Opin. Biotechnol 39, 48 (2016).
Article CAS PubMed Google Scholar
Elbourne, A., Crawford, R. J. & Ivanova, E. P. Nano-structured antimicrobial surfaces: From nature to synthetic analogues. J. Colloid Interface Sci 508, 603 (2017).
Article ADS CAS PubMed Google Scholar
Pogodin, S. et al. Biophysical model of bacterial cell interactions with nanopatterned cicada wing surfaces. Biophys J. 104, 835 (2013).
Article ADS CAS PubMed PubMed Central Google Scholar
Oh, J. K., Lu, X., Min, Y., Cisneros-Zevallos, L. & Akbulut, M. Bacterially antiadhesive, optically transparent surfaces inspired from rice leaves. ACS Appl. Mater. Interfaces 7, 19274 (2015).
Article CAS PubMed Google Scholar
Jiang, R. et al. Lotus-leaf-inspired hierarchical structured surface with non-fouling and mechanical bactericidal performances. J. Chem. Eng. 398, 125609 (2020).
Green, D. W. et al. High quality bioreplication of intricate nanostructures from a Fragile Gecko skin surface with bactericidal properties. Sci. Rep. 7, 41023 (2017).
Article ADS CAS PubMed PubMed Central Google Scholar
Bixler, G. D. & Bhushan, B. Rice- and butterfly-wing effect inspired self-cleaning and low drag micro/nanopatterned surfaces in water, oil, and air flow. Nanoscale 6, 76–96. https://doi.org/10.1039/C3NR04755E (2014).
Article ADS CAS PubMed Google Scholar
Dundar Arisoy, F. et al. Bioinspired photocatalytic shark-skin surfaces with antibacterial and antifouling activity via nanoimprint lithography. ACS Appl. Mater. Interfaces 10, 20055 (2018).
Article CAS PubMed Google Scholar
Diu, T. et al. Cicada-inspired cell-instructive nanopatterned arrays. Sci. Rep. 4, 7122 (2014).
Article CAS PubMed PubMed Central Google Scholar
Bhadra, C. M. et al. Antibacterial titanium nano-patterned arrays inspired by dragonfly wings. Sci. Rep. 5, 16817 (2015).
Article ADS CAS PubMed PubMed Central Google Scholar
Wu, S., Zuber, F., Brugger, J., Maniura-Weber, K. & Ren, Q. Antibacterial Au nanostructured surfaces. Nanoscale 8, 2620 (2016).
Article ADS CAS PubMed Google Scholar
Fisher, L. E. et al. Bactericidal activity of biomimetic diamond nanocone surfaces. Biointerphases 11, 011014 (2016).
Ivanova, E. P. et al. Bactericidal activity of black silicon. Nat. Commun. 4, 2838 (2013).
Article ADS PubMed Google Scholar
Dickson, M. N., Liang, E. I., Rodriguez, L. A., Vollereaux, N. & Yee, A. F. Nanopatterned polymer surfaces with bactericidal properties. Biointerphases 10, 021010 (2015).
Article PubMed PubMed Central Google Scholar
Telang, V. S. et al. Harnessing additive manufacturing for magnesium-based metallic bioimplants: Recent advances and future perspectives. Curr. Opin. Biomed. Eng. 17, 100264 (2021).
Raghunandhan, R. et al. Chitosan/PAA based fiber-optic interferometric sensor for heavy metal ions detection. Sens. Actuators B Chem. 233, 31 (2016).
Liu, S. et al. 3D superhydrophobic sponge coated with magnesium hydroxide for effective oil/water mixture and emulsion separation. Ind. Eng. Chem. Res 59, 11713 (2020).
Mai-Prochnow, A., Clauson, M., Hong, J. & Murphy, A. B. Gram positive and Gram negative bacteria differ in their sensitivity to cold plasma. Sci. Rep. 6, 38610 (2016).
Article ADS CAS PubMed PubMed Central Google Scholar
Hasan, J. et al. Selective bactericidal activity of nanopatterned superhydrophobic cicada Psaltoda claripennis wing surfaces. Appl. Microbiol. Biotechnol. 97, 9257 (2013).
Article CAS PubMed Google Scholar
Ivanova, E. P. et al. Natural bactericidal surfaces: Mechanical rupture of pseudomonas aeruginosa cells by cicada wings. Small 8, 2489 (2012).
Article CAS PubMed Google Scholar
Jenkins, J. et al. Antibacterial effects of nanopillar surfaces are mediated by cell impedance, penetration and induction of oxidative stress. Nat. Commun. 11, 1626. https://doi.org/10.1038/s41467-020-15471-x (2020).
Article ADS CAS PubMed PubMed Central Google Scholar
Ishak, M. I. et al. Insights into complex nanopillar-bacteria interactions: Roles of nanotopography and bacterial surface proteins. J. Colloid Interface Sci. 604, 91–103. https://doi.org/10.1016/j.jcis.2021.06.173 (2021).
Article ADS CAS PubMed Google Scholar
del Valle, A. et al. Mechanically induced bacterial death imaged in real time: A simultaneous nanoindentation and fluorescence microscopy study. ACS Appl. Mater. Interfaces. 12, 31235–31241. https://doi.org/10.1021/acsami.0c08184 (2020).
Article CAS PubMed Google Scholar
Modaresifar, K., Kunkels, L. B., Ganjian, M., Tümer, N. & Hagen, C. W. Deciphering the roles of interspace and controlled disorder in the bactericidal properties of nanopatterns against Staphylococcus aureus. Nanomaterials 10, 1. https://doi.org/10.3390/nano10020347 (2020).
Velic, A., Hasan, J., Li, Z. & Yarlagadda, P. K. D. V. Mechanics of bacterial interaction and death on nanopatterned surfaces. Biophys. J. 120, 217–231. https://doi.org/10.1016/j.bpj.2020.12.003 (2021).
Article ADS CAS PubMed Google Scholar
Hawi, S. et al.Critical review of nanopillar-based mechanobactericidal systems.ACS Appl.Nano Mater.5, 1–17.https://doi.org/10.1021/acsanm.1c03045 (2022).
Hong, Y., Zeng, J., Wang, X., Drlica, K. & Zhao, X. Post-stress bacterial cell death mediated by reactive oxygen species. Proc. Natl. Acad. Sci. 116, 10064–10071. https://doi.org/10.1073/pnas.1901730116 (2019).
Article ADS CAS PubMed PubMed Central Google Scholar
Olivi, M. et al. Inhibition of microbial growth by carbon nanotube networks. Nanoscale 5, 9023–9029. https://doi.org/10.1039/C3NR02091F (2013).
Article ADS CAS PubMed Google Scholar
This material is based on the research/work support by the Changi General Hospital and the Singapore University of Technology and Design, under the HealthTech Innovation Fund (HTIF Award No. CGH-SUTD-2020-001) and by the Agency for Science, Technology and Research (A*STAR) (Singapore), under AME Individual Research Grant (A20E7c0108).
Entropic Interface Group, Engineering Product Development, Singapore University of Technology and Design, 8 Somapah Road, Singapore, 487372, Singapore
Ashutosh Agarwal, Hasanthi L. Senevirathna, Franklin Anariba & Ping Wu
Clinical Trials and Research Unit, Changi General Hospital, 2 Simei Street 3, Singapore, 529889, Singapore
Department of Laboratory Medicine, Changi General Hospital, 2 Simei Street 3, Singapore, 529889, Singapore
Department of Urology, Changi General Hospital, 2 Simei Street 3, Singapore, 529889, Singapore
Terence Sey Kiat Lim & Foo Cheong Ng
Anariba Brands Group, Science, Mathematics and Technology, Affiliated to Engineering Product Development, Singapore University of Technology and Design, 8 Somapah Road, Singapore, 487372, Singapore
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
Writing original draft, review/editing, synthesis, characterization, and analysis of coated melamine sponge: A.A.; Characterization of biphasic nanoparticles: H.L.S.; Bactericidal studies and analysis: S.H.K.; Bactericidal studies, analysis, review draft: C.S.L.W.; Bactericidal studies, analysis: T.S.K.L.; Conceptualization, analysis, acquiring research funding: F.C.N.; Analysis, review draft, acquiring research funding: F.A.; Conceptualization, analysis, acquiring research funding and supervision: P.W.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Agarwal, A., Senevirathna, H.L., Koo, S.H. et al. Bioinspired bi-phasic 3D nanoflowers of MgO/Mg(OH)2 coated melamine sponge as a novel bactericidal agent. Sci Rep 13, 13290 (2023). https://doi.org/10.1038/s41598-023-40336-w
DOI: https://doi.org/10.1038/s41598-023-40336-w
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
Mg Mgco3 Sign up for the Nature Briefing: Translational Research newsletter — top stories in biotechnology, drug discovery and pharma.