Publisher - Road Bike Action
Q: What is the deal with valve caps, and why don’t most people use them? Aluminum Valve Stems
A: The Presta valve, which is the common valve for road bikes, has a manual valve closure unlike the Schrader valve that is spring-loaded. The Presta valve is slightly simpler in design and only uses one seal with a smaller-diameter hole needed in the rim to fit the 6mm stem. This is why it is more common on road bikes, because a smaller hole is needed in the rim and they are slightly lighter, too (of course, specifically shedding a valve cap to save weight as some have advised is the silliest reason to do so).
Since the valve core of the Presta valve protrudes and can have a sharp edge, the cap is best used to protect itself when the tube is folded up and not in use. It can also prevent tearing a jersey if the tube is carried in your back pocket.
On a Schrader valve, the core is inset and sits almost flush with the stem. This leaves a small void where dirt and debris can collect and compromise the integrity of the seal.
So Presta valve caps have no use once the tube is installed; take off the caps and look pro. If you decide to toss your old tube into your bag or pocket, put the cap on so you don’t poke anything. Now, if you use a Schrader valve, then I’d suggest a cap just to be safe, but if one is missing, it’s not the end of the world.
Get real time updates directly on you device, subscribe now.
Tweet of the Day: Chris Froome Announces Return to Racing
Tour Down Under: Losing The Battle To Win The War
WHAT YOUR PRESTA VALVE CAPS ARE ACTUALLY FOR
HOOKLESS WHEELS 101 — WHAT TO KNOW
SHOULD I CHANGE CRANK ARM LENGTH?
WHAT’S THE DEAL WITH ROAD TUBELESS?
THROWBACK THURSDAY, 2015: ALEX DOWSETT BREAKS THE HOUR…
TOM PIDCOCK SHOWS OFF INSANE DESCENDING SKILLS
WATCH 2023 TOUR DOWN UNDER PROLOGUE HIGHLIGHTS
stick on wheel weights BIKE OF THE WEEK: FEZZARI VEYO